tween periods of agitation and then a short soak until advanc-
ing to the next part of the cycle.
Cycle
Added Wash Time (minutes)
Normal Eco
8
Perm Press
3
Heavy Duty
4
Bulky/Sheet
4
Delicate
3
Table 2
Deep Fill
Use this option to add extra water to any cycle when a deeper
fill level is desired.
Status
The active Status light will flash at the beginning of the cycle.
The Status lights are lit throughout the cycle to show what part
of the cycle is running.
Light
Description
Soak
The Soak status light is lit during the Pre-
Soak step of the cycle, if selected.
Wash
The Wash status light is lit during the
first fill step and the wash step of the cy-
cle.
Rinse
The Rinse status light is lit during the
rinse portions of the cycle including Ex-
tra Rinse, if selected.
Spin
The Spin status light is lit during the final
spin portion of the cycle.
Table 3
Audio Signals
An audio signal will sound for three seconds at the end of
each cycle. To turn it off, hold the Deep Fill button for three
seconds. Hold it again for three seconds to turn the signal
back on. A one-second tone will sound to confirm that the End
of Cycle signal is turned off or on.
Audio signals will sound when a knob selection is changed
when the Start/Pause or Deep Fill buttons are pressed and
while a cycle is paused. To turn them off, hold the Deep Fill
button for 10 seconds. Hold it again for 10 seconds to turn the
signals back on. A three-second tone will sound to confirm that
these signals are turned off or on.
In addition, the Status lights will be lit in an upward pattern
when the signal is turned on. The lights will be lit in a down-
ward pattern when the signal is turned off.
To Wash Clothes
IMPORTANT: Before using your new washer, make
sure the washer cord is connected to an appropriate
electrical outlet that is properly installed and connec-
ted to a protective earth/ground. Make sure the washer
hoses are connected to the hot and cold water faucets,
and that the faucets are turned on. Be sure the drain
hose is not kinked and is inserted into a drain. Refer to
the INSTALLATION INSTRUCTIONS for details of prop-
er washer installation.
IMPORTANT: Prior to first wash, use an all purpose
cleaner, or a detergent and water solution, and a damp
cloth to remove shipping dust from inside of wash
drum.
1. Get the clothes ready for washing. Empty pockets and
cuffs. Sort items into separate loads. Pretreat stains and
heavily soiled areas.
IMPORTANT: Remove all sharp objects from laundry
to avoid tears and rips to items during normal ma-
chine operation.
2. Measure and add low sudsing, High Efficiency (HE) deter-
gent to the washtub. Follow instructions on detergent pack-
age for amount to use.
NOTE: High efficiency (HE) detergent is recommen-
ded for use in this machine. Look for the HE logo or
“high efficiency” on the detergent’s label.
3. Add clothes loosely into the washtub (16 lbs. [7.2 kg] maxi-
mum dry clothes load).
TLW2367N_SVG
Operating Your Washer
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
11
Part No. 204954EN
Содержание TC5102WN
Страница 2: ......
