Page 6 of 12
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Position and Level the Tumble Dryer
The tumble dryer may be moved with or without the
skid. To remove the skid, unscrew the four shipping
bolts, and discard them.
To fit a 200 pound tumble dryer (with shipping skid)
through an 8 foot (2.43 meters) high door, you must
remove the front access panel. The upper 3 inches
(76 mm) of the stove must also be removed on
200 pound gas tumble dryers. Removing the entire gas
or steam heater assembly and the shipping skid will
reduce the height to 75 inches (1905 mm).
Level the tumble dryer to within 0.125 inch (3 mm)
from front-to-rear (level on cylinder rib), and side-to-
side (level on top panel). Shim under corners to level
and stabilize unit. Tumble dryer must not rock.
Make-Up Air
Table 1
Required Make-Up Air Opening
(to the outside) for Each Tumble Dryer
Models
Opening
200 Pound
525 in.
2
(3710 cm
2
)
free air
