ALLIANCE ELEVATOR JOURNEY LULA Скачать руководство пользователя страница 13

EMERGENCY LIGHT

In the event of a main power failure, the emergency cab light will light automatically.

EMERGENCY HANDS - FREE TELEPHONE 

1) If your lift is equipped with an Emergency Hands-Free Telephone, press and hold down the 
button in the telephone box to activate the phone line. A short time delay (adjustable by the 
installing technician) will occur.
2) Release the button once the call is picked up by the telephone line. The system will 
automatically dial out to a pre-programmed telephone number as set up by the installing 
technician

MANUAL LOWERING DEVICE (MACHINE ROOM) (Figure 4)

TO BE DONE BY TRAINED PERSONAL ONLY!

In the event of power failure, the cab can be moved to a lower level manually by using the 
following procedures:
1) Obtain the key to unlock the door to the machine room where the elevator pump unit is 
located.
2) Instruct the person(s) in the elevator to remain calm and stay well back from the door of
the elevator. Ease their concern by telling them your intentions.

3) Switch the main disconnect switch to the “OFF” position for the main power supply to the 

elevator pump unit.
4) Locate the red Manual Lowering Knob on the pump unit. Twist the Manual Lowering Knob 
to lower the cab. See Figure 4. Maintain constant pressure on the knob until the elevator 
reaches the lowest landing and stops automatically. (Although you may not be able to see 
the elevator, this is readily

detected since there will be no further noise as the oil flows to the reservoir.)

7

Содержание JOURNEY LULA

















Отзывы: