12
Operation steps
1. With everything connected, turn on the water, check for leaks.
2. Open the sink top faucet.
3. Within a few minutes (up to 15) the water will start to run from the faucet slowly.
4 Let the water run for at least 30 minutes. This fl ushes the carbon fi lters on fi rst time
use.
5. After initial fl ushing, close the sink top faucet. The system is now ready for use.
6. Change fi lters and Nano Inline fi lter regularly (see page 5 for the life time of fi lters) or
when the total disolve solid (TDS) of output water is over 300 mg/L.
1. Do not use hot water (over 45
o
C)!
2. Do not freeze the machine!
3. Switch off electricity and water source if away for more than 5 days, and drain out
pure water.
Caution