Allflex AWR300 Скачать руководство пользователя страница 14

Страница: 14 / 53

Allflex AWR300 User Guide

13/11/19

Page 10

Operating States

The AWR300 has several operating states related to display status and communication

possibilities over USB. The following chart shows the different states.

Reset

Stickreader Mode (CDC)

Virtual Comport

Display ON

Communication enabled

SD-Card Mode (MSC)

Mass Storage

Display OFF

No Communication

Switch-Off-Time

>2 sec.

Suspend Mode

Display OFF

Communication enabled

Sleep Mode

Display OFF

No Communication

Timeout (30min)

Key pressed

Timeout

USB plug-in

When the reader is switched on and it is connected via USB, it works in CDC mode. This means

that a virtual comport is created on the computer and it can send commands to the device via

a serial port connection. In this state, the mass storage mode is not activated and files cannot

be copied to or from the AWR300.
After the configurable switch-off-time (default = 60 seconds) has elapsed, the reader enters

suspend mode. The display is switched off but communication is still possible. In this state,

the blue LED on the right above the display flashes in cycles of one second. After the switch-

off-time has elapsed again, the device enters sleep mode and communication is not possible

anymore. When the external power adapter is connected (charging, multicolor LED is flashing

red), the device remains in suspend mode and does not enter sleep mode at all.
If the AWR300 is connected to USB while it is switched off, the SD-card mode is activated. In

this case, the reader is attached to the computer as a mass storage device and file transfer is

possible. Once the key is pressed, the device switches on and uses CDC mode immediately.

Содержание AWR300






















































Результаты поиска

Содержание AWR300

Отзывы:

Похожие инструкции для AWR300

Бренды по названию

Популярные бренды

Allflex AWR300, Руководство пользователя

Результаты поиска

Содержание AWR300

Отзывы:

Похожие инструкции для AWR300

Бренды по названию

Популярные бренды