Allfett Multi Line ALL-10 Series, Введение и руководство пользователя

Страница: 13 / 20

PAGE
12
www.allfett.net
RULES TO COMPLY WHILE USING AND WARRANTY CONDITIONS
1.
Damages occur while additional transports after delivering the goods from ALLFETT to the customer
DISQUALIFIES THE WARANTY.
2.
Pumps are produced to lubrication purpose only and are not convenient to work more than 2 hours
continuously. Working under maximum pressure more than 2 hours will harm the system. Damages occur
from this reason DISQUALIFIES THE WARANTY.
3.
Washing of the pump with pressured water causes damage. Any damage occur from this reason
DISQUALIFIES THE WARANTY.
15.
Pump must be filled from the grease nipple. If grease level is lower than the minimum level (as you can
not see grease level) grease nipple must be used to prevent air entrance inside the pomp body. Lockable
filling cover option can only be used after filling pump from grease nipple up to minimum level.
Any foreign materials, dirt or small particules while filling lead to system units failing and possibly property
damage to equipments. Damages or faults occur from this reason DISQUALIFIES THE WARANTY.
14.
Lubricant will be used in the system must certainly be clean and any foreign materials must not enter
while filling.
13.
Rubber based lubricant types must not be used in the system. Damages or faults occur from this reason
DISQUALIFIES THE WARANTY.
12.
Only LITHIUM based and EP additive lubricants must be used with in system.
11.
Only proper NLGI class lubricants must be used with in system. NLGI class must be changed according
to weather conditions. Use NLGI 0 for cold weather, increase the NLGI class up to 3 towards hot weathers.
10.
Keeping an uncovered cable(s) during system assembly may cause fatal damages where high voltage
is transformed to low voltage. Lines must be connected properly to prevent personal injury and damage
to property.
8.
7.
Damages coming from voltage fluctuation, wrong electricity installation, connecting wrong voltage to
product DISQUALIFIES THE WARANTY.
All electrical connections and lines must be checked regularly for damage and to ensure that they are
firmly in place.
6.
Pumps have an electric driven motor. Electrical lines must be connected properly as described in PAGE
11 - 12 and applied only by qualified and instructed personel.
5.
Pump reservoir is made of transparent material to see grease level. Painting any part of the pump is
not recomended. Any painted parts DISQUALIFY THE WARANTY.
4.
Transformer is necessary if there is no “ 24 V DC ” electrical source. Use minimum 5A current transformer.
9.