13
TIP:
For easy spring installation, connect spring to V-ring of mat
and pull toward you, to connect to frame. Use a second spring as
a tool to hook onto the one you are installing.
IMPORTANT:
If you have a PowerBounce Trampoline, open the
separate PowerBounce box and use those instructions to install
the PowerBounce springs while you install the standard springs
in the following steps.
9)
Connect jumping mat to trampoline frame using 4 springs.
Connect each spring to a V-ring and spring notch, approximately
1/4 circle apart from each other. Warning labels must face up.
Note:
For this step, the springs do not have to be perfectly
spaced. They are to help keep tension on the mat while you
connect the remaining springs.
10)
Start at a spring that is already connected. While standing
outside the frame, count 4 V-rings and spring notches clockwise,
and connect another spring. The easiest way to connect a spring is
to hook spring onto V-ring, then pull it toward you and hook it
into spring notch on top of frame rail.
11)
Continue counting 4 V-rings and notches and connecting a
spring until you have gone all the way around the trampoline.
When you get to a spring that you connected in Step 9, reposition
it if necessary, so that the springs are all spaced exactly 4 V-rings
and spring notches apart.
V-rings
Spring
Ref. #6
Spring notches
Spring
Ref. #6
Spring
Ref. #6
(Top view)
(Top view)
(Top view)
Mat
Ref. #5
Warning label on
mat
facing up
Warning label on
mat
facing up
Assembly and Installation Instructions
