29
necessary, please consult your supply authority for system
impedance information.
Connecting the hob to the mains power supply
This hob must be connected to the mains power supply only
by a suitably qualified person.
Before connecting the hob to the mains power supply, check
that:
1. The domestic wiring system is suitable for the power drawn
by the hob.
2. The voltage corresponds to the value given in the rating
plate.
3. The power supply cable sections can withstand the load
specified on the rating plate.
To connect the hob to the mains power supply, do not use
adapters, reducers, or branching devices, as they can cause
overheating and fire.
The power supply cable must not touch any hot parts and
must be positioned so that its temperature will not exceed
75
℃
at any point.
The power supply should be connected in compliance with the
relevant standard, or a single-pole circuit breaker. The method
of connection is shown below.