allen XR16 Hovertrim Скачать руководство пользователя страница 6

Страница: 6 / 32

INTRODUCTION

Thank you for purchasing an

Allen

machine. The following pages are designed to help you

gain safe and efficient service from your machine.

IMPORTANT:

This ‘Owners Handbook’ should be regarded as part of the product as it

gives essential information regarding product safety, operation, maintenance and specifi

cations. Read and understand this handbook prior to operating your machine for the first

time. Make sure you are familiar with all the controls and points of regular maintenance.

If you have any doubts, consult your local authorised dealer who will be pleased to give

you assistance.

IMPORTANT:

This machine is designed solely for cutting grass and other low lying

ground vegetation within the limitations stated in this handbook. Use in any other way is

considered as contrary to the intended use. Compliance with and strict adherence to the

conditions of operation, service and repair as specified in this handbook also constitute

essential elements of the intended use.

This machine should be operated, serviced and repaired only by persons who are familiar

with its particular characteristics and who are acquainted with the relevant safety

procedures.

The safety precautions listed in this handbook and all other generally recognised

regulations on safety must be observed at all times.

Any arbitrary modifications carried out to this machine may relieve the manufacturer of

liability for any resulting damage or injury.

Allen

machines are robustly constructed and designed for efficient economical

performance under normal conditions. Correct operation and maintenance will ensure a

long and satisfactory service life. Prior to despatch from our factory every effort is made to

ensure that your machine is delivered in perfect condition.

Throughout this handbook all references to

left

and

right

are as viewed from behind the

handlebar, in the direction of forward travel.

This handbook is based on information available at the time of publication.

We reserve the right to amend product specifications without prior notification.

Содержание XR16 Hovertrim

































Результаты поиска

Содержание XR16 Hovertrim

Отзывы:

Похожие инструкции для XR16 Hovertrim

Бренды по названию

Популярные бренды

allen XR16 Hovertrim, Руководство пользователя

Результаты поиска

Содержание XR16 Hovertrim

Отзывы:

Похожие инструкции для XR16 Hovertrim

Бренды по названию

Популярные бренды