allen WB1824, Руководство пользователя, Страница: 24 / 56

SECTION 2
ASSEMBLY
068522 Page 24
Assembly Instructions
Installing Cable Tension Kit:
1. Loop dead end of cable through the Hook & Eye
Turnbuckle.
2. Apply first clip one base width from dead end of
wire rope. U-Bolt over dead end. Live end rests in
clip saddle. Tighten nuts evenly to recommended
torque.
3. Apply second clip as close to loop as possible.
U-Bolt over dead end. Turn nuts firmly but DO NOT
TIGHTEN.
4. Apply all other clips. Space evenly between first
two and 6-7 rope diameters apart.
5. APPLY TENSION and Tighten all nuts to recom-
mended torque.
6. Check nut torque after rope has been in opertation.
7. Mount End Bracket Assembly to frame of workbridge as shown.
Image of Completed Clamp Assembly