allen WB1824 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 56

allen WB1824 Скачать руководство пользователя страница 12

SECTION 1

SAFETY

068522

Page 12

Safety-Alert Signs

This manual contains Safety-Alert Signs, as defined below, which must
be followed to reduce the possibility of improper servi ce damage to the

equipment or personal injury. Read and follow all Safety-Alert Signs

included in this manual.

NOTE

defines an operating procedure, condition,

etc. which is essential to highlight that contains

useful or important information.

EMERGENCY

is used for the identification of safety

equipment, first aid, or emergency egress locations.

NOTICE

used to convey safety information on labels and signs.

CAUTION

is indicative of a potentially hazardous

situation which, if not avoided, may result in minor

or moderate injury.

WARNING

Indicative of a potentially hazardous situ-

ations that could result in death or serious injury

DANGER

indicates an imminently hazardous situ-

ation which, if not avoided, will result in death or

serious injury

Manual Tag Safety Detail

«
...
10
11
12
13
14
...
»

Содержание WB1824

























































Отзывы:

Нет отзывов