allen Turf Trooper II, Руководство по эксплуатации

Страница: 10 / 24

15
necessary. Removal of the Cylinder Belt greatly
eases this operation.
Note:
The performance of a blunt cylinder/bottom
blade will not be improved by tightening the
cylinder to the bottom blade. In such cases the
cylinder/bottom blade needs to be sharpened.
TO ADJUST
The cylinder is supported by two swivel bearing
housings. Slacken the front Bearing Locking Bolt
‘S’, Fig. 19.
By using the Cylinder Adjuster Bolts ‘T’ on the
top of the cylinder cover, Fig. 20, raise or lower
the cylinder as required. Turn the Adjuster Bolt
‘T’ anti-clockwise to move the cylinder towards
the bottom blade and clockwise to raise the
cylinder.
After adjusting, retighten the Bearing Locking
Bolts
‘S’ and check to see that the cylinder is
correctly set.
Always be extremely careful when rotating
the cylinder by hand. Always use paper long
enough to keep fingers away from the cutting
edge.
Never attempt to touch or check
cylinders when they are moving under power
or even when the engine is running.
Remember:
Unless belts are removed, turning ONE cylinder
TURNS ALL THREE.
PARKING BRAKE
The internal disc brake fitted to the transaxle is
operated by the Parking Brake Lever ‘
G ’, Fig. 5
and is self adjusting, no further maintenance is
necessary.
GUARANTEE
If there is any component, or components,
manufactured by ALLEN POWER EQUIPMENT
LTD that is found to be defective within 12
months from the date of purchase (or in the case
of a machine used for hire purposes, 45 days),
ALLEN POWER EQUIPMENT LTD undertake to
replace the faulty component/components free of
charge through authorised dealers.
The following are NOT covered under this
Guarantee:
1. A NEW MACHINE — which has been
subject to operation in excess of
recommended capacities, misuse,
negligence or accident, or has been altered
or modified in a manner not authorised by
ALLEN POWER EQUIPMENT LTD.
2. TRANSPORTATION charges — to and from
an authorised dealer.
ALLEN POWER EQUIPMENT LTD operate a
policy of continual improvement and reserve the
right to alter product specification without giving
prior notice.
After each season, we recommend that you
have your machine serviced by your dealer,
preferably between October and January, to
avoid delay at the start of the following
season.