1A
OPERATIONS
1A-7
1.3 Service Safety
Poorly maintained equipment can become a safety hazard! In order for the equipment to operate safely and
properly over a long period of time, periodic maintenance and occasional repairs are necessary.
DO NOT
attempt to clean or service machine while it is running. Rotating parts can cause severe injury.
DO NOT
use gasoline or other types of fuels or flammable solvents to clean parts especially in enclosed areas. Fumes
from fuels and solvents can become explosive and can be hazardous to your health.
ALWAYS
operate machine with all safety devices and guards in place and in working order.
ALWAYS
keep area around muffler free of debris such as leaves, paper, cartons, etc. A hot muffler could ignite such items
starting a fire.
ALWAYS
replace worn or damaged components with spare parts designed and recommended by ALLEN ENGINEER-
ING.
ALWAYS
remove key and disconnect battery on machines before servicing to avoid accidental start-up.
ALWAYS
use appropriate lifting procedures when moving this equipment. This riding trowel is extremely heavy and
should be lifted only with the lifting bridle that came packaged with the machine. The lifting capacity should be at least
3000lbs.
ALWAYS
check the operating area to ensure it is clear before starting the engine.
ALWAYS
test the safety kill switch before operating the trowel.
NEVER
place your feet inside the guard rings while starting or operating this equipment.
NEVER
leave this machine unattended while it is running.
NEVER
smoke on, around or near this machine. Fire or explosion could result from flames or sparks.
ALWAYS
clean the machine after each use with a pressure washer to remove buildup of concrete and oils.
NOTE: Do not use extreme or excessive pressure inside the engine compartment.
ALWAYS
securely support this riding trowel when performing maintenance where the machine has to be raised.
