allen PRO 430 Скачать руководство пользователя

Страница: 28 / 104

1-10

SECTION 1

SAFETY

055561; 01/12

1.3, continued
Transportation Safety

•

NEVER

allow any person or animal to stand

underneath the equipment while lifting.

• Some walk-behind trowels can be lifted or moved by two people utilizing lifting tubes or other
special attachments. Generally, however, they must be lifted using lifting bales and cranes,
hoists, or forklifts.

•

NEVER

transport trowel with float pans attached unless safety catches are used and are

specifically cleared for such transport by the manufacturer.

•

NEVER

hoist the trowel more than three feet off the ground with float pans attached.

• Before lifting, make sure that the lifting bales are not damaged.

• Always make sure crane or lifting device has been properly secured to the lifting bales of the
equipment.

•

ALWAYS

shutdown engine before transporting.

•

NEVER

lift the equipment while the engine is running.

• Tighten fuel tank cap securely to prevent fuel from spilling.

• Use adequate lifting cable (wire or rope) of sufficient strength.

•

DO NOT

lift machine to unnecessary heights.

•

ALWAYS

tie down equipment during transport by securing the equipment with rope.

Содержание PRO 430









































































































Результаты поиска

Содержание PRO 430

Отзывы:

Похожие инструкции для PRO 430

Бренды по названию

Популярные бренды

allen PRO 430, Руководство по эксплуатации и запасным частям

Результаты поиска

Содержание PRO 430

Отзывы:

Похожие инструкции для PRO 430

Бренды по названию

Популярные бренды