6
TOOL USE AND CARE
Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the
hands of untrained users.
Maintain tools with care. Keep cutting tools sharp and clean.
Check for misalignment or binding of moving parts, breakage of parts, and any other condition that
may affect the tool’s operation. If damaged, have the tools serviced before using. Many accidents
are caused by poorly maintained tools.
Do not force tool. Use the correct tool for your application. The correct tool will do the job better
and safer at the rate for which it is designed.
SERVICE
Tool service must be performed only by qualified repair personnel. Service or maintenance
performed by unqualified personnel may result in a risk of injury and void warranty.
When servicing a tool, use only identical replacements parts. Use of unauthorized parts may create
a risk of shock or injury and void warranty.
MAINTENANCE
The core casing is properly lubricated at the factory. It is recommended for every 50-100 hours of
use, the core be removed and wiped with a clean, dry cloth and
EP2- LITHIUM GREASE
be applied.
DO NOT disassemble vibrator head. The vibrator head is sealed at the factory and contains a special
no maintenance assembly. Breaking the seal and adding lubricant will significantly decrease the
performance and life of the tools. If the vibrator head is damaged and your warranty is still active,
call your authorized dealer for a replacement.
CLEANING
Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These
chemicals may weaken the plastic materials used in these parts.
Use a cloth dampened only with water. For best results, clean the vibrator head and core casing
while the concrete is still wet.
Blow or vacuum dirt and dust out of all crevices in and around the engine unit at least once a week.
Never let any liquid or wet concrete get inside the engine unit.
Never immerse the engine unit into concrete or any liquid.
