4
SPECIFIC SAFETY RULES
o
Always keep your hands and face away from vibrating head when operating.
o
Keep hands away from moving parts.
o
Ensure your hands are not wet when using the corded or cordless vibrator.
o
Use both hands for safe handling of this tool. This tool should not be used while
standing on a ladder.
o
This tool is intended only for vibrating concrete. Any other use of the product may cause
serious personal inury.
o
Do not use tool in a concrete mixer. Serious personal injury may result.
o
Do not alter or modify the tool in any way.
o
Switch off the tool immediately if you notice abnormal noise or something faulty during
operation.
o
Inspect the tool carefully for breakage, cracks or deformation before each operation or
if you accidently drop the tool or strike the tool against something.
o
Be careful not to allow water, wet concrete or the like to get into the engine
compartment.
o
Do not let the tool fall into wet concrete.
o
Insert the vibrating head carefully between iron/steel frames.
o
When using with reinforcing rods, use a rubber coated vibrating
head.
o
Do not crush, twist, or overly bend the flexible hose.
o
Use a wet cloth or the like to carefully wipe off any wet
concrete left on the tool after use.
o
Extra care should be given to thorough cleaning of the
engine components.
o
Do not operate this tool for long periods of time. Vibration
caused by the operating action of this tool may cause
permanent injury to fingers, hands, and arms. Use gloves to
provide extra cushion, take frequent rest periods, and limit
daily time of use.
