allen HDX750 Скачать руководство пользователя страница 20

Страница: 20 / 82

1-4

SECTION 1

SAFETY

056335; 01/12

1.1
General Safety Precautions

1.1.1 Safety-Alert

Signs

This manual contains Safety-Alert Signs, as defined below, which must be followed to
reduce the possibility of improper servi ce damage to the equipment or personal
injury. Read and follow all Safety-Alert Signs included in this manual.

NOTE defines an operating procedure,

condition, etc. which is essential to

highlight that contains useful or

important information.

EMERGENCY is used for the identification of safety equipment,

first aid, or emergency egress locations.

NOTICE used to convey safety information on labels and signs.

CAUTION is indicative of a potentially hazardous situation which,

if not avoided, may result in minor or moderate injury.

Potentially hazardous situations that could result in death

or serious injury are indicated by the word WARNING.

DANGER indicates an imminently hazardous situation which,

if not avoided, will result in death or serious injury.

Содержание HDX750



















































































Результаты поиска

Содержание HDX750

Отзывы:

Похожие инструкции для HDX750

Бренды по названию

Популярные бренды

allen HDX750, Руководство по эксплуатации и запасным частям

Результаты поиска

Содержание HDX750

Отзывы:

Похожие инструкции для HDX750

Бренды по названию

Популярные бренды