allen HDX605, Инструкция по безопасности и эксплуатации

Страница: 39 / 62

7. Pitch Adjustment
Different pitch angles are needed as you work the different stages of the concrete. When changing or setting
pitch (angle of trowel blades), slow the machine down, set the desired degree of pitch on the left side of the
machine and then adjust the right side to match.
To change the pitch, the operator will use the rocker switch located at the top of either joystick. By pressing
the rocker switch towards the inside, the pitch will decrease, pressing the switch toward the outside of the
joystick will increase the pitch level. (see Figure 2.5).
8. Enable Machine Blades
The machine trowel blades are enabled by the foot pedal (
E
). Hold down the pedal to enable the rotors to begin
turning, release pressure off the pedal to stop the rotors.
FIGURE 2.5
Pitch Adjustment
Trowel Operation
SECTION 2
OPERATIONS
068356 Page 39