manualshive.com logo in svg

allen AMM12H13, Руководство по эксплуатации и запасным частям

Поделиться
Скачать
allen AMM12H13 Скачать руководство пользователя страница 23

SECTION 1

SAFETY

068238

Page 23

•  ALWAYS

 know the location of the nearest fire extinguisher.

•  ALWAYS

 know the location of the nearest first aid kit.

•  ALWAYS

 know the location of the nearest phone or keep a phone on the job site. Also, know the phone numbers of 

the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.

•  Engine fuel exhaust gases contain very poisonous carbon monoxide. This gas is colorless and odorless, and can 

cause death if inhaled.

•  The engine of this equipment requires an adequate free flow of cooling air. 

NEVER

 

operate this equipment in any enclosed or narrow area where free flow of the air is 
restricted. If the air flow is restricted it will cause injury to people and property and 
serious damage to the equipment or engine.

•  NEVER

 operate the equipment in an explosive atmosphere or 

near combustible materials. An explosion or fire could result 
causing severe bodily harm or even death.

•  ALWAYS

 keep clear of rotating or moving parts while operating this machine.

1.3 - General Safety, continued

Содержание AMM12H13

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды