allen 6500 Скачать руководство пользователя

Страница: 25 / 64

• DO NOT

place hands or fingers inside engine compartment when engine is running.

• NEVER

operate the engine with heat shields or guards removed.

• Keep fingers, hands hair and clothing away from all moving parts to prevent injury.

• DO NOT

remove the radiator cap while the engine is hot. High pressure boiling

water will gush out of the radiator and severely scald any persons in the general
area of the trowel.

• DO NOT

remove the engine oil drain plug while the engine is hot. Hot oil will gush

out of the oil tank and severely scald any persons in the general area of the trowel.

• NEVER

touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before servic-

ing equipment.

• NEVER

run engine without an air filter or with a dirty air filter. Severe engine damage may occur.

Service air filter frequently to prevent engine malfunction.

• NEVER

tamper with the factory settings of the engine or engine governor. Damage to the engine or

equipment can result if operating in speed ranges above the maximum allowable.

• ALWAYS

use extreme caution when working with flammable liquids.

• DO NOT

start the engine near spilled fuel or combustible fluids. Fuel is extremely flammable and its

vapors can cause an explosion if ignited.

• ALWAYS

refuel in a well-ventilated area, away from sparks and open flames.

• NEVER

use fuel as a cleaning agent.

• DO NOT

smoke around or near the equipment. Fire or explosion could result from fuel vapors or if

fuel is spilled on a hot engine.

1.4 - Engine Safety

SECTION 1

SAFETY

038479

Page 25

Содержание 6500

































































Результаты поиска

Содержание 6500

Отзывы:

Похожие инструкции для 6500

Бренды по названию

Популярные бренды

allen 6500, Руководство по эксплуатации и запасным частям

Результаты поиска

Содержание 6500

Отзывы:

Похожие инструкции для 6500

Бренды по названию

Популярные бренды