User’s Manual for Repeater
MR303D Varia
M0041A8B.doc
Id.-No. 153114
Page 17
26-Oct-2000
3 SETTING INTO OPERATION
3.1 Adjusting the Frequency
The setting of the start channel and the stop channel must be carried out in
accordance to the following tables:
figure 3-1 Channel setting for Id.No. 152796 & 154595
figure 3-2 Channel setting for Id.No. 152797
3.2 Setting the Attenuation
(Id.-Nos. 152797 & 154595 only)
The attenuation can be set by means of a rotary switch, which is located in the
centre of the repeater. Use a small screw driver to turn the switch carefully to the
position for the required attenuation. The label below the rotary switch shows the
possible positions and the corresponding values of the attenuation.
figure 3-3 Rotary switch for attenuation setting
