6
Connecting Brake
•
The Jogger kit includes a hand-operated V-brake caliper for use while running.
To connect the brake, simply squeeze the brake caliper (#11) together, while
pulling the curved metal tube cable housing (#13), and insert the cable ferrule
(#12) into the metal bracket on the opposing brake arm. This fixes the brake
caliper and allows your brake to function properly.
.
•
After Cable is installed you must run the cable up the left side of the canopy.
Fixing the cable under the Velcro tabs that hold the cover in place as shown.
o
•
Next, attach the brake lever clamp to the handlebar center by loosening and
retightening the hand knob.
#11
#12
#13
#14
#7
