Step 1
5
(AA)
Qty: 2
(BB)
Qty: 2
(CC)
(DD)
(FF)
(GG)
M8X60 Bolt
M8 Washer
M8 Nut
Qty: 2
M8 Nut Cap
Qty: 2
Hex Wrench
Qty: 1
Wrench
Qty: 1
BB
CC
DD
BB
CC
DD
GG
FF
Slide the Pole Stand (B) into the Base (A). Align and insert M8x60 Bolt (AA)
into the corresponding holes. Place Washer (BB) and Nut (CC) onto Bolt (AA) as
shown. Tighten by using Wrench (GG) and Hex Wrench (FF). Once bolts are fully
tightened, place Nut Cap (DD) onto Nut (CC).
AA
If you have any questions or problems, please call our customer service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday.