background image

3

Before Assembly

Remove all parts and hardware from the box. Place all items on a carpeted or 

scratch-free work surface, as this will avoid damaging parts during assembly. 

The shipping box provides an ideal work surface. 

To avoid accidentally discarding small parts or hardware, do not dispose of any 

packaging or contents of the shipping carton until assembly is complete. 

Use the parts and hardware lists below to identify and separate each of the 

pieces included. 

The use of power tools for assembly is not recommended. Power tools can 

damage the hardware and/or split the wood.

Note:

 Do not fully tighten all bolts until all parts are in place. Failure to follow 

these instructions may cause the bolts to misalign during assembly.

Care and Cleaning

Dust often and use a vacuum cleaner crevice tool to clean seams. 
Do not place furniture in direct sunlight and keep furniture at least 60 cm / 2 ft 

from heat sources to avoid fading.

Warranty

This warranty is extended to the original purchaser and applies to defects in 

materials and workmanship of your patio furniture provided your furniture is 

maintained with care and used only for personal, residential purposes. 

Frames are warranted to be free from defects in material or workmanship for a 

period of one (1) year. 

Cushions, straps and/or wicker weaves are covered for a period of five (5) years 

against defects in material or workmanship. 

Содержание 2809212










Отзывы: