8
3, 8, or 16 Axis SERCOS interface Module
Publication
1756-IN572E-EN-P – March 2004
attaching cable to the module. The end of the cable that emits light is the
transmitter.
The Module’s Product Label
The following figure shows the product label that is affixed to the side of the
1756-M03SE, 1756-M08SE, and 1756-M16SE modules. The three modules
look very much alike and checking the label carefully is the only way to be sure
that you have the correct module. Pay particular attention to the CAT. NO.
SERIES field on the label. This field indicates whether you have a
1756-M03SE, 1756-M08SE, or 1756-M16SE module and also the series of
the module. The label contains additional information about the module and
should be thoroughly checked prior to installation to ensure that the product
matches your expectations.
Figure 3 1756-M08SE Product Label
Installing the Module
To install the 3, 8, or 16 Axis SERCOS interface module:
A-B Catalog Number
and Series
Product Name
Certifications
Ratings
Series and Firmware
version Information
Power Requirements
A-B Part Number
Date of Manufacture
Catalog
Revision