Publication 1757-QS030A-US-P - March 2000
Quick Start
Getting Started with ProcessLogix R300.1
This Quick Start guide describes the tasks you will need to complete to become
familiar with the ProcessLogix™ system, including:
•
starting the software
•
creating a controller
•
creating digital and analog I/O modules
•
assigning modules to a Controller Execution Environment (CEE)
•
configuring a Peer-to-Peer Block
²
creating a Control Module
²
building the Peer-to-Peer Block
²
downloading the Control Module to the 1757-PLX52 Process Controller
module
²
verifying proper operation
•
creating a PID Loop
²
creating a Control Module
²
building the PID loop
²
downloading the Control Module to the 1757-PLX52 Process Controller
module
²
verifying proper operation
•
viewing pre-built screens
•
shutting down the system
This chapter also explains what you need to do before you begin installing the
system. Refer to the ProcessLogix Hardware Installation Instructions, publication
1757-IN901A-US-P for information on the components that make up your
ProcessLogix system
Allen-Bradley Drives