Allen-Bradley PowerFlex 20-HIM-A6, Руководство пользователя

Страница: 60 / 74

60 Rockwell Automation Publication 20HIM-UM001E-EN-P - May 2017
Chapter 4 Using the HIM
Changing Access Code-protected Drive/Peripheral Parameters
When the host drive is access code-protected, parameter settings for the drive and
its connected peripherals can be viewed—but not changed until after the correct
access code value is entered.
When attempting to edit a parameter value while logged out, the HIM will
prompt you for the access code before allowing access.
Access code protection also applies to:
• Drive start-up procedure
• Factory defaults
• User sets
• CopyCat function
Follow these steps to edit access code-protected parameters.
1. Access the Status screen (see Figure 6 ).
2. If Port 00 (host drive) is not shown above the ESC
soft key
, use the
or key to scroll to Port 00.
3. Press the key to display its last-viewed folder.
4. Use the or key to scroll to the PROPERTIES folder.
5. Use the or key to select Log In .
6. Press the (Enter) key to display the Enter Password popup box.
7. Use the numeric keys to enter the existing access code value.
Use the
soft key
to delete an erroneous entry.
8. Press the ENTER
soft key
to enter the existing access code.
Thereafter, any parameter setting can be changed.
ESC ENTER
Stopped
0.00 Hz
AUTO
F
Enter Password
0
0 << 65535