Allen-Bradley PanelView 550, Руководство по установке

Страница: 3 / 64

41061-109-01(B)
Installation Instructions
PanelView 550/600 Touch Screen Terminals
This document describes how to mount a PanelView 550/600 touch screen
terminal in a panel or enclosure and apply power.
•
hazardous locations
•
European Union Directive Compliance
•
wiring and safety guidelines
•
enclosures
•
required tools
•
mounting dimensions
•
clearances
•
installing the terminal in a panel
•
installing the memory card retainer
•
connecting DC power
For more information on the PanelView 550/600 Operator Terminals, refer to
Publication 2711-6.1.
Hazardous Locations
See nameplate label on terminal for certification details.
The PanelView 550 touch screen terminals have an operating temperature code of
T2 (maximum operating temperature of 300
°
C or 572
°
F). Do not install the
terminals in environments where atmospheric gases have ignition temperatures
less than 300
°
C (572
°
F).
The PanelView 600 touch screen terminals have an operating temperature code of
T4 (maximum operating temperature of 135
°
C or 275
°
F). Do not install the
terminals in environments where atmospheric gases have ignition temperatures
less than 135
°
C (275
°
F).
!
ATTENTION: In Class 1, Div 2 and Class 1, Zone 2 hazardous locations,
the PanelView 550/600 terminal must be wired per the National Electric
Code and/or Canadian Electric Code as it applies to hazardous locations.
Peripheral equipment must also be suitable for the location in which it is
installed.