Allen-Bradley MicroLogix 1761-NET-ENI, Руководство пользователя

Страница: 91 / 102

Publication 1761-UM006A-EN-P - February 2001
BOOTP Configuration Method (default) B-5
Based on this configuration, the
BOOTPTAB
file looks like:
#Legend:gw -- gateways
#ha -- hardware address
#ht -- hardware type
(1)
#ip -- host IP address
#sm -- subnet mask
#vm -- BOOTP vendor extensions format
(2)
#tc -- template host
#Default string for each type of Ethernet client
defaults5E: ht=1:vm=rfc1048
#Entries for SLC 5/05 processors:
sigma1: tc=defaults5E:ip=12.34.56.1:ha=0000BC1D1234
sigma2: tc=defaults5E:ip=12.34.56.2:ha=0000BC1D5678
sigma3: tc=defaults5E:ip=12.34.56.3:ha=0000BC1D9012
Run the Boot Server Utility
You can run either the DOS-based utility or the Windows-based
BOOTP utility, but not both.
If you have BOOTP enabled and the message
BOOTP response not
received
appears, check the cabling connections and the BOOTP
server system.
Both utilities are located in the
C:\ABIC\BIN
directory and use the
information contained in the
BOOTPTAB
file.
Be sure to place the
BOOTPTAB
file in the directory from which you are
running the BOOTP utility. If this file is not found in that directory, the
utility will try to find the file in the directory specified by the
environment variable
ABIC_CONFIG
.
(1) 1 = 10 MB Ethernet
(2) Use rfc 1048.
If you’re using
this platform then invoke this
executable from the See
page
DOS-based DTLBOOTD.EXE DOS command line (specify optional
parameters if necessary) B-6
Windows DTLBOOTW.EXE Windows Program Manager B-6