17
It lights up when a Marker card becomes jammed in the printer. Remove all Marker cards from the
feeder, then re-insert correctly. When the LED indicator no longer flashes, turn off the printer and
carefully remove the Marker card from the printer.
It lights up when the black ink cartridge or the clean unit is almost empty.
It lights up when either the black ink cartridge or clean unit is almost empty. Replace either the black ink
cartridge or clean unit as required.
It flashes when the print head moves to the ink-cartridge replacement position. The LED flashes more
quickly when the ‘Clean Unit’ is empty than when the black ink cartridge is empty.
It is also possible to determine the level of ink by the speed at which the error indicator LED
flashes
when the print head moves to the cartridge replacement position. Please refer to the table below.
Indicator LED
Procedure
Replace the black ink cartridge when the error LED
flashes at
the same speed as the indicator LED for the mains switch.
Replace the ‘Clean Unit’ when the error LED
flashes twice as
fast as the indicator LED for the mains switch
.
Replace the black ink cartridge and the ‘Clean Unit’ when the
error indicator LED lights up continuously.
LED 2: Operation indicator (green LED)
The FAST TRACK
TM
Printer is ready for operation when the green LED lights up constantly.
It flashes when the printer is receiving data or printing, when an ink cartridge is being replaced or the ink
carriage change sequence is active or the print head is being cleaned.
LED 3: Overheating indicator (red LED)
Indicates that the system is overheating.
LED’s 4-6: Performance indicator
The LED indicates the fusing performance of the system.