Allen-Bradley ControlNet 1747-ACN15 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 19

Allen-Bradley ControlNet 1747-ACN15 Скачать руководство пользователя страница 3

3

Publication 1747-5.41

Compliance to European Union Directives

If this product has the CE mark, it is approved for installation within the
European Union and EEA regions. It has been designed and tested to meet the
following directives.

EMC Directive

This product is tested to meet Council Directive 89/336/EEC Electromagnetic
Compatibility (EMC) and the following standards, in whole or in part,
documented in a technical construction file:

• EN 50081-2

• EMC - Generic Emission Standard, Part 2 - Industrial Environment

• EN 50082-2

• EMC - Generic Immunity Standard, Part 2 - Industrial Environment

This product is intended for use in an industrial environment.

Low Voltage Directive

This product is tested to meet Council Directive 73/23/EEC Low Voltage, by
applying the safety requirements of EN 61131-2 Programmable Controllers, Part
2 - Equipment Requirements and Tests.

For specific information required by EN 61131-2, see the appropriate sections in
this publication, as well as the following Allen-Bradley publications:

• Industrial Automation Wiring and Grounding Guidelines For Noise

Immunity, publication 1770-4.1

• Automation Systems Catalog, publication B111

AB Spares

«
1
2
3
4
5
...
»

Содержание ControlNet 1747-ACN15




















Отзывы:

Нет отзывов