Rockwell Automation Publication GMSP-IN002A-EN-P - March 2016
7
Remote Monitoring for PowerFlex 755 AC Drive
Status Indicator Descriptions
Status Indicator
Color
Indication
Possible Action
RS485/RS232
OFF
Port disabled
Steady red
Port failure
Contact support
Steady green
Port enabled from Netbiter Argos
Uplink/WAN
Steady green
Connected to Netbiter Argos
Steady red
Incorrect IP settings
Dynamic IP Address - check for DHCP server on network
Fixed IP Address - check the settings for IP Address, gateway and DNS servers
Updating red
Unable to connect to Internet/Netbiter Argos
Check network settings and firewalls
Modem (EC350 only)
OFF
Modem disabled
Steady red
Modem failure
Contact support
Updating red
SIM card failure
Check that the SIM card is correctly inserted and not damaged
Steady orange
PIN code enabled on SIM card
Disable PIN code on the SIM card
Updating orange
No APN server specified
The APN (Access Point Name) Server must be set from Netbiter Argos
Steady green
Modem registered on mobile network
Updating green
Modem is searching for mobile network
Gateway
OFF
Unit has no power, or is starting up
Steady green
Normal operation
Updating green
Firmware update in progress
Steady red
Hardware failure - contact support
Updating red
Application failure - contact support
Power
OFF
No power
Steady green
Unit has power
Ethernet Link
(located on RJ45 ports)
OFF
No network detected
Orange flicker
Activity on 10 Mbps Ethernet network
Green flicker
Activity on 100 Mbps Ethernet network
Specifications
Attribute
Value
Mobile Communication (EC350
only)
5-band 3G/UMTS (WCDMA/FDD): 800, 850, 1900, AWS, 2100 MHz
Quad-band GSM/GPRS: 850, 900, 1800, 1900 MHz
Antenna Connector
(EC350 only)
Mobile:
SMA female
USB Interface
Micro USB, USB 2.0
Mounting
DIN rail (EN 50022) and wall mounting
Dimensions (H x W x D)
1 x 5.3 x 3.6 in. (25.6 x 135 x 92 mm)
Temperature
Operating:
-40…149 °F (-40…65 °C)
Storage:
-49…185 °F (-45…85 °C)
Humidity Range
5…95% RH, noncondensing
Power Supply
12…48V DC
Power Consumption
EC310:
2.5 W
EC350:
4.5 W
Certifications
EC310:
CE, ROHS
EC350:
CE, ROHS, Telec, JATE
To check the mobile signal strength on EC350:
Press and release the Mode button.
The top 5 statud indicators will now show the signal strength:
1 updating red: No/unknown signal
1 updating orange: Poor signal
1 updating green: OK signal
2…5 updating green: Good to optimum signal
The status indicators will automatically return to showing the standard after 60
seconds.
