Rockwell Automation Publication 2711P-IN026H-EN-P - May 2018
13
High-bright Display Modules
Logic Module Compatibility
The high-bright display module is only compatible with the following DC logic modules.
PanelView Plus, PanelView Plus CE, and PanelView Plus 6 Logic Modules
The high-bright display module is not compatible with AC logic modules catalog number
2711P-RPxAx.
External Power Supply For Nonisolated DC Terminals
Use a single, 24V DC power supply, such as catalog number 2711P-RSACDIN, to power each
PanelView Plus device. Using a separate, isolated and ungrounded source to power each terminal
prevents ground loop currents from damaging the terminals.
The output on the power supply must be isolated from the input and not connected to earth/
ground.
Cat. No.
Description
PanelView Plus 700 to 1500 Logic Modules
2711P-RP2
Logic module with 128 MB flash/128 MB RAM, DC input
PanelView Plus CE 700 to 1500 Logic Modules
2711P-RP6
PanelView Plus CE logic module with 128 MB flash/128 MB RAM, DC input
PanelView Plus 6 700 to 1500 Logic Modules
2711P-RP8D
PanelView Plus 6 logic module with 1 GB flash/512 MB RAM, DC input
2711P-RP9D
PanelView Plus 6 logic module with 1 GB flash/512 MB RAM, DC input, extended features
TIP
To identify nonisolated DC logic modules refer to the PanelView Plus Terminals User Manual,
publication
2711P-UM001
.
ATTENTION:
Use a safety extra-low voltage (SELV) or protective extra-low voltage (PELV) power
supply as required by local wiring codes for your installation. The SELV or PELV power sources
provide protection so that under normal and single-fault conditions, the voltage between the
conductors, and between the conductors and functional earth or protective earth does not exceed
a safe value.