Packing Data
PK
(Catalog No. 2711-NP3)
The package of mounting studs (Catalog No. 2711-NP3) contains 18 studs.
Use these studs to mount the following
•
PanelView 1400 Operator Keypad Terminal (requires 18 studs)
•
PanelView 1400 Operator Touchscreen Terminal (requires 12 studs)
•
6180 Industrial Computer (requires 18 studs)
Installing the Mounting Studs
1. Cut an opening in the panel using the panel cutout included in this package.
Carefully drill 5.56 mm (7/32 inch) holes for studs as indicated.
2. Install the mounting studs (Catalog No. 2711-NP3) using a 7/32 inch socket
on the end of the stud. Turn stud clockwise to tighten to approximately 10
inch pounds (1.1 N
m).
Mounting Stud
Bezel
Gasket
Integral Spacer
Self-Locking Nuts
Panel or Enclosure
Installation Instructions
