Allen-Bradley 22-COMM-E FRN 1.xxx, Руководство пользователя

Страница: 28 / 166

3-4 Configuring the Adapter
Figure 3.2 New Entry Dialog Box
4. Edit the following:
5. Click OK to apply the settings. The adapter appears in the Relation
List with the new settings ( Figure 3.3 ).
Figure 3.3 BOOTP Server Window with an Adapter in the Relation List
6. To assign this configuration to the adapter permanently, click
Disable BOOTP . When power is cycled on the adapter, it will use
the configuration you assigned it and not issue new BOOTP requests.
7. To save the Relation List, select File > Save .
Box
(1)
(1)
For definitions, refer to the Glossary .
Type
IP Address A unique IP address for the adapter
Subnet Mask The subnet mask for the adapter’s network
Gateway The IP address of the gateway device on the adapter’s network
TIP: To enable BOOTP for an adapter that has had BOOTP
disabled, first select the adapter in the Relation List, then
click
Enable BOOTP , and finally reset the adapter.