manualshive.com logo in svg

Allen-Bradley 1756-L61S ControlLogix 5561S, Справочное руководство

Поделиться
Скачать
Allen-Bradley 1756-L61S ControlLogix 5561S Скачать руководство пользователя страница 79

Rockwell Automation Publication 1756-RM093J-EN-P - April 2018

79

Safety Add-On Instructions

Appendix B

Create Signature History Entry

The signature history provides a record for future reference. A signature history 
entry consists of the instruction signature, the name of the user, the timestamp 
value, and a user-defined description. Up to six history entries may be stored. You 
must be offline to create a signature history entry.

Export and Import the Safety Add-On Instruction

When you export a safety Add-On Instruction, choose the option to include all 
referenced Add-On Instructions and User-Defined Types in the same export file. 
By including referenced Add-On Instructions, you make it easier to preserve the 
signatures.

When importing Add-On Instructions, consider these guidelines:

•

You cannot import a safety Add-On Instruction into a standard project.

•

You cannot import a safety Add-On Instruction into a safety project that 
has been safety-locked or one that has a safety task signature.

•

You cannot import a safety Add-On Instruction while online.

•

If you import an Add-On Instruction with an instruction signature into a 
project where referenced Add-On Instructions or User-Defined Types are 
not available, you may need to remove the signature.

Verify Safety Add-On Instruction Signatures

After you download the application project containing the imported safety Add-
On Instruction, you must compare the instruction signature value, the date and 
timestamp, and the safety instruction signature values with the original values you 
recorded prior to exporting the safety Add-On Instruction. If they match, the 
safety Add-On Instruction is valid and you can continue with the validation of 
your application.

Test the Application Program

This step consists of any combination of Run and Program mode, online or 
offline program edits, upload and download, and informal testing that is required 
to get an application running properly.

TIP

The Signature Listing report in RSLogix 5000 software prints the instruction 
signature, the timestamp, and the safety instruction signature. Print the 
report by right-clicking Add-On Instruction in the Controller Organizer and 
choosing Print>Signature Listing.

Содержание 1756-L61S ControlLogix 5561S





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды