Allen-Bradley 1608S-3V480E, Руководство пользователя, Страница: 11 / 26

Rockwell Automation Publication 1608S-UM001C-EN-P - November 2018 11
Configuration Chapter 2
Manual Configuration - Ethernet or Direct Connection to a Personal Computer
To manually configure the monitor with a static IP address: The following
network information is needed. When the monitor initially powers up, it will
attempt DHCP configuration, then default to these values listed below
Table 1 - i-Sense Monitor Default Network Settings.
A standard Ethernet cable is required for static IP address configuration via direct
connection to a personal computer (an Ethernet cross-over cable may be required
with older personal computer network interface cards).
To communicate with the monitor in the default mode, the networking settings
on the personal computer must be changed temporarily to the values listed.
Table 2 - Computer Network Settings
The Microsoft Windows Internet Protocol (TCP/IP) Properties configuration
window below is typical
Figure 1 - Typical Microsoft Windows Internet Protocol (TCP/IP) Properties window.
i-Sense Monitor Network Setting Default Value
Static IP Address 192.168.1.200
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
Primary DNS Server 192.168.1.201
Secondary DNS Server 192.168.1.200
Computer Network Settings Value
IP Address 192.168.1.201
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
Primary DNS Server 192.168.1.201
Secondary DNS Server 192.168.1.200