background image

DVS Control 

To use the Allen & Heath XONE:DB2 mixer with DVS control and Serato DJ, 
you will first need to own a Serato DJ license and a DVS Expansion Pack 
license (these two products have been bundled together as the 

Club Kit). 

Click here to purchase the Club Kit

Once you have purchased and activated the Club Kit (or individual licenses 
separately) follow the steps below to get DVS control working with your 
Allen & Heath XONE:DB2 mixer.

Install Drivers

Connect your mixer and open the latest version of Serato DJ. You should 
see an ‘

INSTALL DRIVER’ dialogue box appear in the right hand side-

panel. Click 

‘INSTALL DRIVER’ and follow the installer prompts. If you don’t 

have the supported hardware with you right now you can still download the 
driver from the hardware manufacturers website.

Select Input source

Once your turntables or CDJs are connected to the mixer, check that you 
are using the correct Input setting on the back of the mixer. If you have 
connected an analogue source (turntables), make sure you have the input 
set to PH (Phono), if you have connected a digital source (CDJs) make sure 
it is set to LN (Line) accordingly.

NOTE: If you want to connect an analogue source to channels 1 or 4, you 
will notice there is no switch on the rear of the mixer and will need to 
enable the hardware preamp for those channels

See the XONE:DB2 user 

guide for more information.

 
 
 

 
Select Primary Decks

Open the 

SETUP screen and click the AUDIO tab, here you will need to 

select your Primary Decks.

Choosing Channel 1 and 2, will allow you to have a traditional 1-2-3-4 
channel configuration. Choosing Channel 2 and 3 will allow you to have
a 3-1-2-4 configuration (from left to right across the mixer).

Select which deck configuration you are using with the mixer and change 
if necessary. If you notice you are getting signal from your control tone but 
on the wrong deck, you might need to double-check your Primary Decks in 
the 

SETUP screen or the physical inputs on the back of the mixer.

You are now set up to use your mixer with Serato DJ and DVS control 
using the REL or ABS control modes. Refer to the Serato DJ manual for 
more information on Control Modes.

Содержание Xone:DB







Отзывы: