ALLEN & HEATH XONE:96, Руководство пользователя

Страница: 15 / 41

ALLEN & HEATH
15
AP11645_1_XONE:96 User Guide
MASTER SECTION
13
14
USB 1 / USB 2 Active Indicators
LED Illuminates BLUE when a computer connected to the
mixer’s corresponding USB 1 or USB 2 port is enabled.
13
MIDI 1 / 2 Switches
Switch the local XONE:96 MIDI output to the corresponding
USB 1 or USB 2 ports ON / OFF.
Switch status does not affect MIDI sent to the MIDI OUT port,
via X:Link, or between USB 1 and USB 2 Partners.
14
AUXILIARY RETURN CHANNELS C - D
12
4
2
1
3
2
SIG LED indicators
Bi-colour LEDs illuminate GREEN to show an audio input is
present. If a SIG LED illuminates RED continually, turn the
corresponding LEVEL control down.
3
Channel LEVEL Control
Adjust the RTN C and RTN C input levels from fully off to
+10dBu
Channel ON/OFF Switch
Route signals from hardware connected via RTN C or RTN D
inputs direct to the LR MIX at pre-MST levels.
ON/OFF switches are enabled for MIDI control. See below.
1
Channel CUE Switch
Press to listen to the channel audio levels from MONITOR
headphones outputs and to view pre-LR MIX levels on the
main LR MIX meters. Switches illuminate RED when active.
Default switch setting is AUTO-CUE. Refer to p.9 for details.
CUE switches are also enabled for MIDI control. See below.
4
MIDI Control
•
Channel ON/OFF and CUE switches send MIDI NOTE ON/OFF messages to the rear panel MIDI OUT port,
and to USB 1 and USB 2 ports when the corresponding MIDI 1/ 2 switch is active.
•
Channel ON/OFF and CUE switches can also be remotely controlled by MIDI output via USB 1 and USB 2.
See p.28 for details