ALLEN & HEATH XONE:96, Руководство пользователя

Страница: 10 / 41

ALLEN & HEATH
10
AP11645_1_XONE:96 User Guide
INPUT CHANNELS 1 - 4: USB 1/PHONO/LINE/USB 2
4
1
3
2
Channel Input Select Switch
Switch CH A and CH B inputs between USB1, MIC, RTN, or
USB 2 sources.
Switches also send MIDI NOTE ON/OFF messages to USB1,
USB 2 and MIDI OUT ports. See p.28 for details.
2
SEND 1 & SEND 2 Controls
Control the levels of channel audio sent to external effects
hardware connected via rear panel SND1 and SND2 outputs.
SEND 1 is switchable pre/post-FADER and also routes audio
to internal soundcard inputs USB 9/10
SEND 2 is fixed post-FADER, with switched option for routing
audio to internal soundcard inputs USB 11/12. See p.23.
1
Channel GAIN Control
Adjusts the Channel input sensitivity to compensate for
different audio signal source levels. - ∞/+10dB.
If a PK! LED illuminates, turn the corresponding channel
GAIN level down .
3
Channel Equalizer
Stereo Channels 1 - 4 are equipped with a refined
asymmetric XONE 4-BAND EQ, pro6dB boost and
full attenuation (‘kill’) for HI and LO frequencies and with
po10dB boost/-27dB cut for HI MID and LO MID
frequencies.
EQ cut-off frequencies are set at:
HI 3 kHz (High Frequency, treble )
HI MID 1.1 kHz (Upper Midrange Frequency)
LO MID 350 Hz (Lower Midrange Frequency)
LO 180 Hz (Low Frequency, bass)
4
LO / HI
∞
/ centre / +6 LO MID / HI MID -27 / centre / +10