ALLEN & HEATH QU-SB, Руководство по началу работы

Страница: 3 / 20

Qu-SB Getting Started Guide 3 AP10287 iss1
IMPORTANT - Read these instructions before starting:
Safety instructions
Before starting, read the Important Safety Instructions sheet supplied with the equipment. Heed
all warnings printed on the sheet and on the equipment panels.
System operating firmware
The function of the Qu mixer is determined by the firmware (operating software) that runs it. Check
the Allen & Heath website ( www.allen-heath.com ) for the latest version. Firmware can be
downloaded and transferred to the mixer via USB key. Read the Release Notes that come with the
firmware.
This guide refers to Qu-SB firmware
V1.9
.
Software licence agreement
By using this Allen & Heath product and the software within it you agree to be bound by the terms
of the relevant End User Licence Agreement (EULA), a copy of which can be found on the Allen &
Heath website ( www.allen-heath.com/legal ). You agree to be bound by the terms of the EULA by
installing, copying, or using the software.
Further information
Refer to the Allen & Heath website for further information, knowledgebase and technical support.
You can join our Allen & Heath Digital Community to share knowledge and information with other
Qu users. Download the Qu Mixer Reference Guide for more information on the Qu setup and
mixing functions.
General precautions

Ensure an adequate service loop and strain relief when plugging in cables. Run cables to
avoid a trip hazard.

To prevent damage to the equipment, avoid placing heavy objects on the surfaces,
scratching the surfaces with sharp objects, or rough handling and vibration.

Protect the equipment from damage through liquid or dust contamination. Cover the mixer
when it is not being used for a long period.

If the equipment has been stored in sub-zero temperatures allow time for it to reach normal
operating temperature before use at the venue. Recommended operating temperature for
Qu is 5 to 35 degrees Celsius.

Avoid using the equipment in extreme heat and direct sunlight. Make sure the mixer
ventilation slots are not obstructed and that there is adequate air movement around the
equipment.

Clean the surface with a soft brush and dry lint-free cloth. Do not use chemicals, abrasives
or solvents.

It is recommended that servicing is carried out only by an authorised Allen & Heath agent.
Contact details for your local distributor can be found on the Allen & Heath website. Allen
& Heath do not accept liability for damage caused by maintenance, repair or modification
by unauthorised personnel.