ALLEN & HEATH iDR10 Скачать руководство пользователя страница 38

Страница: 38 / 43

iLive Reference Guide – Hardware

Part 1 - 38

AP6526-1 iss.5

Other components available

iPS10

- iLive

backup power supply

Optional 2U rack

mounted power supply to provide redundant backup
for the

iLive

Surface or

iDR0

MixRack. Supplied with

DC and status cables.

iLive Editor software

The Editor application runs on a PC or MAC computer to
control the

iLive

system via Ethernet. Editor is compatible with

both the

iLive

and the

T Series

and can be downloaded free of

charge from the Allen & Heath web site. Download either the
PC or MAC version.

The version number of Editor and the firmware running in the

iLive

must be compatible. Editor should always be updated

when the system firmware is updated.

Editor may be run offline, connected to a system with MixRack

and Surface, or connected to just a MixRack when a Surface is

not required.

Flight cases

- The

iLive-112 144

and

176

systems are shipped with touring grade flight cases as
standard. The smallest

iLive-80

may be ordered with

or without the flightcase. Cases are not available from

the factory for the

T Series

surfaces.

AN6329

iDR10

MixRack

flight case

AN7139

iLive-80

Surface flight case

LEDlamp

18” long gooseneck lamp with 4-pin XLR
connector. Features bright, wide dispersion 4
led lamp array with built-in thumbwheel dimmer.

Depending on Surface size up to three lamps
may be used. The

iDR10

MixRack also has

provision for a lamp.

80m CAT5 cable drum

AH7000

80 meters (264 feet) tour grade Neutrik EtherFlex
cable terminated with EtherCon RJ45 connections.
Approved by Digigram for operation with EtherSound

to 80 meters.

Содержание iDR10












































Результаты поиска

Содержание iDR10

Отзывы:

Похожие инструкции для iDR10

Бренды по названию

Популярные бренды

ALLEN & HEATH iDR10, Справочное руководство

Результаты поиска

Содержание iDR10

Отзывы:

Похожие инструкции для iDR10

Бренды по названию

Популярные бренды