DT164-W User Guide
AP11870 Issue 1
Installation
–
mounting
⚠
WARNING
To prevent injury, this apparatus must be securely attached to
the floor/wall in accordance with the installation instructions.
Mounting on a wall
Use the mounting frame AH11504 in the orientation
shown below. Fix the frame to the wall using appropriate fixings or screws for
the type of wall, then align the threaded inserts on the sides of the DT164-W
with the frame, and secure the unit in place with the 6x M4 6mmT20 screws
provided.
Flush mounting in a wall
Use the mounting frame AH11504 in the
orientation shown below. Align the threaded inserts on the sides of the DT164-
W with the frame, and secure the unit in place with the 6x M4 6mm T20 screws
provided. Connect the power and Cat5 cable/s, then fix the assembly to the
wall using appropriate fixings or screws for the type of wall.
Floor mounting
The DT164-W can be mounted in a floor box / stage pocket /
dip trap. It must be installed in accordance with local installation and wiring
regulations. We recommend using the
ACE Backstage 174SLBK
stage pocket
system for use with the DT164-W.
