DT164-W User Guide
AP11870 Issue 1
DT164-W
The DT164-W is a fixed installation Dante I/O expander for Allen & Heath digital
mixing systems. It provides 16 remote controlled mic/line preamps and 4 XLR
line outputs. It connects to the Dante network over a single Cat5 cable, or two
cables for redundancy.
The DT164-W can be operated freestanding, mounted in a floor pocket, mounted
on a wall, or flush mounted in a wall. Different power options are provided to suit
the application.
⚠
This product must be installed by a professional
installer or qualified electrician.
Contents
Check that you have received the following with your DT164-W unit:
•
Optional gland module (part number 004-1097) for permanent AC
mains wiring installation.
•
Mounting frame (AH11504) for in-wall or wall surface mounting.
•
6x M4 6mm T20 screws (AB2921) for mounting the DT164-W to the
mounting frame.
Software and firmware
Visit the Audinate website to learn more about Dante, and download Dante
Controller to route audio and configure devices on a Dante network:
Preamp control of the DT164-W by an SQ mixer requires SQ
firmware V1.4 or higher and an SQ Dante card.
Preamp control of the DT164-W by a dLive mixer requires dLive
firmware V1.8 or higher and a dLive M-DL-Dante 64x64 or 128x128
card. Use of the iLive/GLD M-Dante card is not supported.
Check
for the latest DT164-W firmware
and instructions on how to update it.
