Allegion Simons Voss Technologies PinCode-Terminal, Быстрое руководство

Страница: 37 / 148

NOTE
Battery warning disables programming mode
Programming mode cannot be used during an active battery warning.
All functions for which programming mode must be entered are
blocked.
1. Replace the battery (see Battery replacement [
}
37] ).
2. Reset the battery warning.
9 Programming mode is accessible again.
7.2 Battery replacement
ü Screwdriver present (Torx TX6).
1. Unscrew the screws holding the cover in place.
2. Remove the cover.
3. Using a screwdriver, slide one side of the battery clips into the open-
ing provided.
IMPORTANT
Jumping out due to spring tension of clamps
Clamps are under tension. They may jump out and be lost when
loosening.
PinCode-Terminal 7. Battery management
37 / 148 EN