ALLDSP ASP-2M6
Safety Instructions
WARNING, FOR YOUR PROTECTION READ THE FOLLOWING: The apparatus shall not be exposed to
dripping or splashing liquid and no object filled with liquid, such as vases, shall be placed on the apparatus.
CLEAN ONLY WITH A DRY CLOTH. DO NOT BLOCK ANY VENTILATION OPENINGS. INSTALL IN
ACCORDANCE WITH THE MANUFACTURERS INSTRUCTIONS. DO NOT INSTALL NEAR ANY HEAT
SOURCES SUCH AS RADIATORS, HEAT REGISTERS, STOVES, OR OTHER APPARATUS (INCLUDING
AMPLIFIERS) THAT PRODUCE HEAT. ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY THE
MANUFACTURER. UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED
FOR LONG PERIODS OF TIME. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or third prong is provided for your safety. If the provided plug does not
fit your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being
walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the
apparatus. Use only with the cart stand, tripod bracket, or table specified by the manufacture, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
tip-over. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped. POWER ON/OFF SWITCH: If the equipment has a Power switch, the Power switch used
in this piece of equipment DOES NOT break the connection from the mains. MAINS DISCONNECT: The plug
shall remain readily operable. For rack mount or installation where plug is not accessible, an all-pole mains
switch with a contact separation of at least 3 mm in each pole shall be incorporated into the electrical
installation of the rack or building. FOR PRODUCTS EQUIPPED WITH EXTERNALLY ACCESSIBLE FUSE
RECEPTACLE: Replace fuse with same type and rating only. MULTIPLE-INPUT VOLTAGE: This equipment
may require the use of a different line cord, attachment plug, or both, depending on the available power
source at installation. Connect this equipment only to the power source indicated on the equipment rear
panel. To reduce the risk of fire or electric shock, refer servicing to qualified service personnel or equivalent.
If connected to 240V supply, a suitable CSA/UL certified power cord shall be used for this supply. This
equipment is intended for rack mount use only.
WARNING: THIS APPLIANCE SHALL BE CONNECTED TO A MAINS SOCKET OUTLET WITH A
PROTECTIVE EARTHING CONNECTION. The cores in the mains lead are colored in accordance with the
following code: GREEN and YELLOW - Earth; BLUE - Neutral; BROWN - Live. As colors of the cores in the
mains lead of this appliance may not correspond with the colored markings identifying the terminals in your
plug, proceed as follows: The core which is colored green and yellow must be connected to the terminal in
the plug marked with the letter E, or with the earth symbol, or colored green, or green and yellow. The core
which is colored blue must be connected to the terminal marked N or colored black. The core which is
colored brown must be connected to the terminal marked L or colored red. This equipment may require the
use of a different line cord, attachment plug, or both, depending on the available power source at installation.
If the attachment plug needs to be changed, refer servicing to qualified service personnel who should refer to
the table below. The green/yellow wire shall be connected directly to the product's chassis.
WARNING: If the ground is defeated, certain fault conditions in the processor or in the system to which it is
connected can result in full line voltage between chassis and earth ground. Severe injury or death can then
result if the chassis and earth ground are touched simultaneously. The symbols shown above are
internationally accepted symbols that warn of potential hazards with electrical products. The lightning flash
with arrow point in an equilateral triangle means that there are dangerous voltages present within the
processor. The exclamation point in an equilateral triangle indicates that it is necessary for the user to refer to
the owner’s manual. These symbols warn that there are no user serviceable parts inside the processor.
Do not open the processor. Do not attempt to service the processor yourself. Refer all servicing to qualified
personnel. Opening the chassis for any reason will void the manufacturer’s warranty. Do not get the
processor wet. If liquid is spilled on the processor, shut it off immediately and take it to a dealer for service.
Disconnect the processor during storms to prevent damage.
Page 3/13
