background image

www.allavino.com 

1-800-710-9939 

Troubleshooting 

 

There are many common issues you may experience with your wine and beverage center that can be solved very easily, 
without the need of a service call. Try the tips below to troubleshoot your unit should you experience any problems: 

 

PROBLEM  

POSSIBLE CAUSE 

Display flash and indicate “HH”, flash speed 
one time per second 

The temperature sensor of zone>37° 

Display flash and indicate “LL”, flash speed 
one time per second 

The temperature sensor of zone<0° 

Display flash and indicate “E0”, flash speed 
one time per second 

Connection failure, wire or component is not 
connect tightly 

Display flash and indicate “E1”, flash speed 
one time per second 

The temperature sensor is failure in 
corresponding zone 

Display flash and indicate “E2”, flash speed 
one time per second 

The defrost sensor (coil senor) is failure in 
corresponding zone 

Unit does not operate                         

Not plugged in or the appliance is turned off 
The circuit breaker tripped or a fuse has blown out 

Unit is not cold enough 

Check the temperature control setting 
External environment may require a higher setting 
The door is opened too often 
The door is not closed completely 
The door gasket is not sealing properly 

Unit is turning on and off frequently 

The room temperature is hotter than normal. 
The door is opened too often. 
The door is not closed completely. 
The temperature control is not set correctly. 
The door gasket does not seal properly. 

The light does not work 

Not plugged in. 
The circuit breaker tripped or a fuse has blown. 
The light bulb has burned out. 
The light button is “OFF”. 

Vibrations 

Check to assure that the unit  is on a level surface. 

The unit seems to make too much noise 

A faint humming noise may come from the flow of the 
refrigerant, which is normal. 
As each cycle ends, you may hear gurgling sounds caused by the 
flow of refrigerator in your wine and beverage center. 
Contraction and expansion of the inside walls may cause 
popping and crackling noises. 
The wine and beverage center is not on a level surface. 

The door will not close properly 

The wine and beverage center is not on a level surface. 
The gasket is dirty. 
The shelves are out of position. 

 
 
 
 
 
Warranty Information 

 

Содержание AW240BC-NH-2S










Отзывы: