8
Operating Instructions and Owner’s Manual
Storage:
Never store a torch that is still hot. When the torch is stored indoors, the connection
between the LP gas tank(s) and the device must be disconnected and the tank(s) removed
from the device and stored outdoors in accordance with Chapter 5 of the “Standard for the
Storage and Handling of Liquefied Petroleum Gases” ANSI/NFPA 58.
NOTE:
· Storage temperature shall not exceed 120degrees F (49 degrees C).
· Place tank on level surface in an upright position. Do not invert or lay tank on its side.
Safety Information:
Safety publications related to safe practice and use:
CSA 2-94
“U.S. Requirements for Hand Held LP Torches for use with fuel supply”
ANSI Z49.1 “Safety in Welding and Cutting”
NFPA 54
“National Fuel Gas Code”
NFPA 58
“Standard for the Storage and Handling of Liquefied Petroleum Gases”
CAUTION:
DO NOT smoke around or expose supply tank(s) to open flames or sparks.
CAUTION:
DO NOT smoke around or expose supply tank(s) to open flame or sparks.
The hose assembly shall be protected from traffic, crushing, and hot surfaces. This may
cause premature wear of the hose.
DO NOT lift tank by the valve. Lifting the tank by the valve may result in damage to
the valve.
