+
-
TL-AU630-R
Manual
Before using the product, please
thoroughly read this manual and
keep it for future reference.
ENG
Design Pat. Pending
Copyright© 2015 CATEYE Co., Ltd.
TLAU63R-150302
1
HOW TO INSTALL BATTERY
1
(SP-11)
x 1
Light unit
FlexTight™ bracket
Dial
AA dry-cell battery
HOW TO MOUNT
2
Rubber gasket
FlexTight™ bracket
1
1
ø
12 – 32 mm
Lever
4
4
or
Attach securely in the mounting position.
Lens
Rubber
gasket
Slot
Close the lens with the slot facing to
the body slot.
Coin
AA (LR6) x 1
Dial
2
2
3
3
2
3
AUTOMATIC LIGHTING TAIL-
LIGHT CHARACTERISTICS
• The light automatically turns on when
the sensor detects light or vibrations
during nighttime riding.
• The light also remains on for approxi-
mately 50 seconds after the bicycle
comes to a complete stop, which
provides safety when waiting for a
traffic signal to change and in similar
situations.
PRECAUTIONS ON USE
• Check periodically to ensure that the
light unit is attached securely.
• Stop your bicycle to operate the switch.
• Keep the light away from children.
• This unit is not totally waterproof.
Please wipe and dry it completely after
using in rain. Otherwise, it may cause
failure.
• If the light unit or parts become dirty
with mud, etc., clean with a soft cloth
which is moistened with mild soap.
Never apply paint thinner, benzine or
alcohol; damage will result.
PRECAUTIONS WHEN REPLAC-
ING THE BATTERY
• Do not press the switch when removing
or installing the lens or batteries.
• Be sure to install batteries in the correct
direction.
• Install the rubber gasket correctly to
maintain waterproof features.
• Remove and store batteries when you
will not use the light for a long period of
time. Otherwise, batteries may leak
liquid, which may result in failure.
INSTALLATION PRECAUTIONS
• Be sure to tighten the dial by hand.
When you tighten it too hard with a tool,
the screw thread may be stripped.
• Check the bracket frequently to be sure
it is properly tightened at all times.
• Round off the cut edge of the bracket
strap to prevent injury.
