background image

9

Owner’s Manual

General Precautions (cont’d)

Electrical Safety (cont’d)

 • All connections and conduits from the generator to the load must only be installed by trained and   

licensed electricians, and in compliance with all relevant local, state, and federal electrical
codes and standards, and other regulations where applicable.

 • The generator must be earth-grounded for fixed installations in accordance with all relevant

electrical codes and standards before operation.

  •  Do not attempt to connect or disconnect load connections while standing in water, or on wet or

soggy ground.

  •  Do not touch electrically energized parts of the generator and interconnecting cables or

conductors with any part of the body, or with any non-insulated conductive object.

  •  Connect the generator only to  a  load or electrical system (120 volt) that is compatible with the

electrical characteristics and rated capacities of the generator.

 • Before servicing equipment powered by the generator, disconnect the equipment from its power

input.

  •  Keep all electrical equipment clean and dry. Replace any wiring where the insulation is cracked,

cut abraded or otherwise degraded. Replace terminals that are worn, discolored, or corroded.
Keep terminals clean and tight.

 • Insulate all connections and disconnected wires.

  •  Guard against electric shock. Prevent body contact with grounded surfaces such as pipes,

radiators, ranges, and refrigerator enclosures.

Personal Safety

  •  Stay alert. Watch what you are doing, and use common sense when operating  a  generator. Do

not use generator while tired or under the influence of drugs, alcohol, or medication.  A  moment
of inattention while operating generators may result in serious personal injury.

  •  Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing,

and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in
moving parts.

4000W Generator

General Precautions (cont’d)

Personal Safety (cont’d)

 • Avoid accidental starting. Make sure the power switch is in its “OFF” position, and disconnect

the spark plug wire when not in use.

 • Remove adjusting keys or wrenches before turning the generator on. A wrench or a key that is

left attached to a rotating part of the generator may result in personal injury.

 • Do not overreach. Keep proper footing and balance at all times.

 • Use safety equipment. Always wear eye protection. Wear ANSI approved safety impact eye

goggles. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for
appropriate conditions.

 • Do not force the generator. Use the correct generator for your application. The correct generator

will do the job better and safer at the rate for which it is designed.

 • Do not use the generator if the power switch does not turn it on or off. Any generator that cannot

be controlled with the power switch is dangerous and must be replaced.

Generator Use and Care

Make sure the power switch is in its “OFF” position and disconnect the spark plug wire before
making any adjustment, changing accessories, or storing the generator. Such preventive safety
measures reduce the risk of starting the generator accidentally.

Store idle generators out of reach of children and other untrained persons. Generators are
dangerous in the hands of untrained users.

Maintain generators with care. Do not use damaged generator. Tag damaged generators “Do not
use” until repaired.

Check for misalignment or binding of moving parts, breakage of parts, and any other condition that
may affect the generator’s operation. If damaged, have the generator serviced before using. Many
accidents are caused by poorly maintained generators.

Use only accessories that are recommended by the manufacturer for your model. Accessories that
may be suitable for one generator may become hazardous when used on another generator.

10

Owner’s Manual

General Precautions (cont’d)

Servicing

Maintain labels and name plates on the generator and engine. These carry important information.
If unreadable or missing, contact our service center toll free at 888-896-6881 immediately for a
replacement.

Generator service must be performed only qualified repair personnel. Service or maintenance
performed by unqualified personnel could result in a risk of injury.

When servicing  a  generator, use only identical replacement parts. Follow all appropriate
instructions in this manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.

Heart Pacemakers

WARNING! PEOPLE WITH PACEMAKERS SHOULD CONSULT THEIR
PHYSICIAN(S) BEFORE USING THIS PRODUCT. ELECTROMAGNETIC
FIELDS IN CLOSE PROXIMITY TO A HEART PACEMAKER COULD CAUSE
INTERFERENCE TO OR FAILURE OF THE PACEMAKER.

Installation

 • Ensure installation meets all applicable safety, and local and national electrical codes. Have

installation performed by a qualified, licensed electrician and building contractor.

 • All electrical work, including the earth-ground connection, should be completed by a licensed

electrician.

  •  Any separate fuel storage or generator supply facility must be built or installed in full compliance      

with all relevant local, state, and federal regulations.

11

12

4000W Generator

General Precautions (cont’d)

Installation (cont’d)

 • If the generator is installed outdoors, it must be weatherproofed and should be soundproofed. It

should not be run outdoors without protection to the generator and wiring conduit.

 • The generator weighs 100 lbs (approx). Two or more people should assist when moving or lifting

this product. Never lift the generator using the engine or alternator lifting lugs. Connect lifting
equipment to the frame of the generator

 • Before lifting the generator, ensure the lift rigging and supporting structure are in good

condition, and are rated to lift such a load.

 • Keep all personnel away from the suspended generator during relocating.

 • The supporting floor/ground surface should be level and strong enough to safely hold the weight

of the generator. If the  floor/grounded surface is not level, strong cross members should be
placed under the full length of the generator frame at its low side.

 • For trailer installation, the generator should be mounted on the center point of the trailer, over

the wheels. The trailer must be capable of supporting the weight of the generator and all
contents (tools, etc.)

 • Install sound-and weather-proofing only when it is not raining or snowing to avoid trapping

moisture within the generator’s area.

Mechanical

 • Always make sure the power switch is in its “OFF” position. Disconnect the spark plug wire, and

allow the engine to completely cool before carrying out maintenance.

 • Check for damaged parts. Before using the generator, any part that appears damaged should

be carefully checked to determine that it will operate properly and perform its intended function.
Check for alignment and binding of moving parts, any broken parts or mounting fixtures, and any
other condition that may affect proper operation technician.

  •  The generator is designed with guards for protection from moving parts. In any case, care must

still be taken to protect personnel and equipment from other mechanical hazards when working
around the generator.

Содержание APGG4000














Отзывы: